Thursday, November 19, 2026

Don't 'zerk out, man!

   I've been working on stuff, I promise!  Unfortunately, my hobby projects are spread across multiple systems and I'm slowly falling behind.  In the struggle, I decided that I wanted to paint a 'fun' model and I dug out the old ForgeWorld Goliath Berzerker.  

  I love painting flesh, red, and glass effects and this model provides all those in droves, so it gave me something to look forward to.  The layers of muscle and the vials of Escher-made drugs scattered all about his body were going to be a blast, so it jumped the line of hobby projects as a 'motivational moment'.  I'm not on Adderall or any other drug, so finding a model (that isn't Drukhari) with that level of assistance was too ironic not to follow through on.  Remember, kids, drugs are bad.  Unless you paid those chicks from up-hive for the good stuff...


First is the flesh, of course.  Having primed the model and given it the ol' zenithal treatment, I figured that some Contrast technique was in order.  I used the Guilliman Flesh first, but that came out too... brown.  Flesh, especially for these roid-heads, is supposed to have some colour in it!  So I pulled out the yellowish Skeleton Horde and did another layer to give a bit more tone to it.  


  As it turns out, the shadows were still a bit too dark under multiple layers, so I pulled out a reddish brown to paint the intermediate layer with a focus on reinforcing those deeper undersides. 


  Now it was time to layer the flesh, muscle-by-muscle.  I absolutely adore painting flesh, especially if it's male and stacked with the muscles.  Catachan, Goliath, even the greenskin Orks all have great models for this and I rarely pass up the opportunity.  Hence, as noted above, this model is 'fun'.



  After all that, I found the layers weren't blending enough for me, so I thought to pull out the trusty Reikland Fleshshade and glaze it to bring it together.  Well, that wasn't the best idea I've ever had because it instantly turned the flesh almost completely sunburnt and dulled down the muscles.  I was not a happy camper.  But I've been in this situation before, so I just started mixing my flesh colours again and layering them up like before.  Luckily, the effect did give me a much deeper shadow for the layering and it turned out better (less cartooney) after it was finally done.  Again.




  The flesh was painted and it was time to get to the other stuff.  Ivory and black was used to paint the eyes and teeth- I must admit that this was the easiest model I've been able to do this with since Adepticon (where I painted a chibi, so that's cheating)!  I blame this on my noob buddy as he paints eyes on everything and I'm not allowed to skip eyes anymore.  
  The armour plates and fire hydrant were painted starting at Black Red, and layered with Scarlet Blood gradually mixed with that same ivory.  The pants were painted with black and Ivory mixed for grey and gradually layered.  All of these steps were just a matter of starting with the darker colour, then the medium colour, then mixing in Ivory for the final highlights.  Textbook basic...  


  There is a ton of metal on this model, as there often is for any denizen of the Underhive, and that required the attention that was looking forward to the least.  The silver bits were all painted with Iron Warriors and the gold bits were painted Warplock Bronze.  


  The gold bits then saw the Warplock Bronze mixed with Retributor Armour in gradual layers until the final step.  Stormhost Silver was used to edge highlight all the silver areas and then mixed into the gold mix to do the final highlights.  Weirdly, all metal ends in bright silver no matter the tone, and I appreciate that as I try to keep paint plans as simple as possible.  


  By now, the metal is done and all that's left is the black stuff and the vials.  For the black stuff, which includes pipes, tubes, and even straps, it was all painted black and then had a smidge of Ivory mixed in to create the darker grey layers.  Finally, a very fine edge highlight or drybrush across ridged pipes was applied and that was done!  Unfortunately, I had all the bootstraps and belt left but I didn't want those to be black as that was just too little detail for the model.  I pulled out Chocolate Brown and repeated the same process as the black by using Ivory and layering.  I was very happy and think the decision was a good one to keep the detail going.  There was also the matter of the bone spurs and spine- that was painted Ivory when I painted the face but I save it until last as I kept rubbing the paint off with my fingers as I handled it.  That was given a quick wash of Agrax Earthshade and then layered up by mixing that shade with Ivory and then just Ivory.  Bone is fun, but it's not the focus of this model.   


The coup-de-grace
  This was the other reason I wanted to paint this model.  I started with the flesh (my favorite thing to paint) and I'm finishing with the liquid vials (an effect that I love!).  I was going to milk this part of the process as it takes some work to pull off well. To start, all of the vials got two liberal coats of Kantor Blue.  



  Next came the Dark Green to represent the super-stimms in those vials.  The key here was to make the green level with the ground, regardless of the vial's orientation.  The struggle was not just making the vials green as they'd be too full of the concoctions.  


  Then came the mixing and keeping that part very wet.  I wanted the green to be 'cloudy', not cartoony, so I almost stippled the layers onto the Dark Green and the mixtures were more water than colour.  This allowed me to kind of wet-blend with the brightest greens at the top but also change the opacity of that green within the glass.  Like I said above- milking it!



  The green liquid had most of its attention, so now I turned my focus on to the glass part of the vials.  It was already dark blue, so now I needed to add the light blue to create that contrast (which is more difficult when you're using complimentary colours like blue and green!).  I simply based Ahriman Blue jsut above the green bits, leaving a thin line of dark blue at the liquid's edge for each of the vials.  


  A quick, and very wet again, line of yellow to draw the distinction between that blue and green...


  Taking a weird approach, I pulled out the old Soulstone Blue paint- this is a very thick and goopy substance that also creates a layer for light to percolate through.  Almost like glass...  I felt clever.  


  Then the white came out and the struggle began.  If the white was too strong, it would look sloppy.  If the white was easily lost, it would lose the effect.  I watered down the white and traced around the top edges of each vial and even added a little glow-dot near that ridge or directly on top.  This is from the 'painting gems' technique and does wonders for smaller glass items as well.  There's a very key trick- be sure to bring the glass colour and highlight over the liquid on the inside.  After all, the glass is the outside and the liquid is inside and painting that will drive the effect home even more.  Did I mention I was looking forward to painting this?


  And that's it!  I did a quick wet-blend of red-to-orange on his mohawk like others in my Goliath gang added Blood For The Blood God effect around all the implants.  The base isn't painted in the final pic, but I did that with Zhandri Dust to basecoat and Ivory to drybrush to match the rest of my Necromunda models by this posting.  Done!  I had fun painting this guy with the flesh, red, and vials and that was my goal.  Now to get to the other projects...


As always, Happy Hobbying!